BHDMP - BLACK GLOSS ALKYD ENAMEL 17038

Product Identification

Product ID:BLACK GLOSS ALKYD ENAMEL 17038
MSDS Date:05/26/1987
FSC:8010
NIIN:00-527-2050
MSDS Number: BHDMP

Responsible Party
EVERSEAL MANUFACTURING CO., INC.
475 BROAD AVENUE
RIDGEFIELD, NJ 07657
US

Emergency Phone: 201-943-4986

Cage: EO432

Contractor
EVERSEAL MFG CO INC
RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 3 - 5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 55%

ACGIH TLV: 120 PPM


RESIN

Fraction By Weight: 41%

OSHA PEL NA

ACGIH TLV: NA

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS SKIN/EYE: IRRITATION

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. EYE: FLUSH WITH WATER
SKIN: WASH WITH SOAP AND WATER.
CONSULT A PHYSICIAN.

Fire Fighting

Flash Point:105F/40.56C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM. FIREFIGHTERS SHOULD WEAR A SELF CONT-AINED BREATHING
APPARATUS.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES, ENSURE ADEQUATE
VENTILA- TION. ABSORB SMALL SPILLS ON DRY ABSORPTION MATL. USE
SPARK PROOF SCOOP FOR LARGER SPILLS.

Handling

Handling and Storage Precautions:AVOID EXCESSIVE HEAT AND OPEN IGNITION
SOURCES.
Other Precautions:NPCA/HMIS RATING 3,2,0,H

Exposure Controls

Respiratory Protection:IF TLV MAY BE EXCEEDED. USE CARTRIDGE MASK
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:323-390F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:65

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL AND LOCAL
REGULATIONS FOR HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.